3D Printing

We can produce parts from your 3D model.
Our 3D printer technologies range from FDM to Polyjet style.

The FDM printers use ABS, Nylon, Polycarbonate or PLA filament.
Layer heights as low as 150 microns (.006″).
The recommended minimum wall thickness of the model is no thinner than .060″.

Our Polyjet printers use a UV curable photopolymer.
Layer heights as low as 100 microns (.004″).
Wall thicknesses of .025″ can be achieved.

Most 3D file formats are acceptable.

Contact Form
  1. (required)
  2. (valid email required)

cforms contact form by delicious:days

You can email your file to: info@uptech3d.com